Troubleshooting Guide: Fire Table Won't Stay Lit

A fire table can be a wonderful addition to your outdoor space, providing warmth and ambiance for gatherings with family and friends. However, it can be frustrating when your fire table refuses to stay lit, leaving you with a cold and disappointing experience. There are several reasons why this might happen, but fear not! In this comprehensive troubleshooting guide, we will explore common issues and offer practical solutions to get your fire table roaring again.

1. Gas Supply Issues:

One of the most common reasons for a fire table not staying lit is a problem with the gas supply. Follow these steps to check and resolve the issue:

• Gas Tank Valve: Ensure that the gas tank's valve is fully open, as a partially closed valve restricts the flow of gas.
• Empty Gas Tank: Verify that there is enough gas in the tank. If it's empty or nearly empty, replace it with a full one.
• Gas Pressure Regulator: Inspect the gas pressure regulator for damage or clogs, as it plays a crucial role in maintaining a consistent gas flow. If it's faulty, contact the manufacturer for a replacement.

2. Blockage in Gas Line:

A blockage in the gas line can hinder the flow of gas to the fire table. To address this, follow these steps:

• Turn Off Gas: Always turn off the gas supply before attempting any maintenance.
• Inspect Gas Line: Check the gas line for visible obstructions, such as debris or insects. Gently clean them using a soft brush or compressed air.
• Check Gas Line Connections: Ensure all gas line connections are secure and tight to prevent gas leaks.

3. Pilot Light Problems:

The pilot light is responsible for igniting the main burner of the fire table. If it's faulty, the fire won't stay lit. Troubleshoot the pilot light as follows:

• Clean the Pilot Orifice: Clear any clogs in the pilot orifice using a needle or a small wire.
• Pilot Flame Height: Check the pilot flame's height; it should be a steady blue flame with a sharp, defined edge. Adjust or clean the assembly if needed.
• Thermocouple Issues: Make sure the thermocouple is properly positioned and not damaged. If it's faulty, consider replacing it with a compatible one.

4. Wind and Weather Conditions:

Wind and adverse weather conditions can blow out the fire or hinder ignition. Take these measures to address the problem:

• Wind Blockers: Install wind blockers around the fire table to shield the flame from strong gusts. Use large potted plants or a windscreen.
• Fire Table Cover: Protect your fire table from rain, snow, and debris by using a weather-resistant cover when not in use.

5. Gas Leak:

Gas leaks are serious safety hazards that can prevent your fire table from staying lit. Perform a gas leak test using soapy water to identify and fix any leaks.

By following these troubleshooting steps and taking proper safety measures, you can enjoy a well-lit and cozy fire table, creating memorable moments with your loved ones around the warm and inviting glow of your outdoor oasis. 

Remember to perform regular maintenance, invest in quality gas and accessories, keep the area around your fire table clear, and follow the manufacturer's instructions for optimal performance and safety. With these tips, your fire table will be ready to provide you with delightful experiences all year round.